Atosa Mixrite ST3036EC Stainless Steel Work Table 30 x 36, Flat Top, Undershelf, NSF
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa Mixrite ST3036EC is a 36" wide, 30" deep stainless steel work table with a flat top and an adjustable undershelf. It stands 34" high. It is built from 18 gauge, 430 stainless steel, and Atosa rates it at 470 lb on the top and 350 lb on the undershelf. It is NSF listed and ships knocked down.
Key Specs at a Glance
| Model | ST3036EC |
| Size | 36" W x 30" D x 34" H |
| Top | Flat, satin finish, sound deadened, all edges turned down |
| Steel | 18 gauge, 430 stainless steel top, undershelf and legs |
| Undershelf | Stainless steel, adjustable height, 24" x 30" (as Atosa lists) |
| Capacity | 470 lb top, 350 lb undershelf (as Atosa lists) |
| Legs and feet | 4 stainless steel tubular legs, 1-5/8", with 1" adjustable bullet feet |
| Weight | 45 lb net, 51 lb shipping |
| Certification | NSF |
| Warranty | 90 days on workmanship |
The 30 x 36 Size
At 36" x 30", the ST3036EC gives one person a full-depth station in a 3' space. The 30" depth leaves room for a cutting board at the front and containers behind it. Choose it over the 24" deep ST2436EC when you have the extra 6" of depth to spare.
The top gives you 1,080 square inches of work surface, about 7.5 square feet. Before you order, measure the space: you need 36" of width, and the table comes 30" out from the wall. Check how much aisle space is left behind anyone standing at the table.
Choosing the Depth
A 30" depth is the middle option. It leaves room for a cutting board at the front with containers or ingredients behind it, without the reach of a 36" table.
The Flat Top
The top is flat edge to edge, with no backsplash or raised rear edge. That makes it the right choice when the table stands away from a wall, sits in an open area, or gets worked from more than one side. You can slide pans, boards and boxes on and off from any edge.
Atosa polishes the whole top to a satin finish and sound deadens it, which reduces the ringing noise of tools and pans set down on bare steel. All edges are turned down, so there is no sharp cut edge where staff lean or reach.
Height and Clearance
The work surface is 34" high. The optional WA400001 casters are 5" high and will raise the table if you add them. If the table will slide under a shelf or counter overhang, measure that clearance first.
The Undershelf
The undershelf is stainless steel and adjusts in height. Atosa lists it at 24" x 30", rated at 350 lb. Use it for bins, bowls, sheet pans and boxed product. Measure your tallest item before you set the height: a lower shelf gives more clearance, a higher shelf keeps items closer to hand.
Load Ratings
Atosa lists 470 lb on the top and 350 lb on the undershelf. Treat those as limits. Spread heavy items out and keep the heaviest near the legs.
For heavy countertop cooking equipment, use an equipment stand instead. The SE3036ECR2 is 36-1/4" wide and 30" deep, and Atosa recommends up to 800 lb on top.
Legs and Leveling
The ST3036EC stands on 4 stainless steel tubular legs, 1-5/8" in diameter, with 1" adjustable bullet feet. Use the feet to level it on an uneven floor so it does not rock.
Add-Ons
Sold separately:
- WA400001 caster set: 4 casters, 5" high, with 1-1/2" expanding stems. Casters let you roll it out to clean behind and under it.
Compare Nearby Sizes
Here is how the ST3036EC compares with the other 30" deep flat top tables:
| Model | Size (W x D) | Legs | Top capacity |
|---|---|---|---|
| ST3030EC | 30" x 30" | 4 | 440 lb |
| ST3036EC | 36" x 30" | 4 | 470 lb |
| ST3048EC | 48" x 30" | 4 | 500 lb |
| ST3060EC | 60" x 30" | 4 | 520 lb |
| ST3072EC | 72" x 30" | 4 | 540 lb |
| ST3084EC | 84" x 30" | 6 | 660 lb |
| ST3096EC | 96" x 30" | 6 | 680 lb |
- Smaller: ST3030EC, 30" wide.
- Larger: ST3048EC, 48" wide.
- Same width at 24" deep: ST2436EC (saves floor space).
- Same width at 36" deep: ST3636EC (larger top).
Assembly
The ST3036EC ships knocked down (KD), and Atosa says it is easy to assemble. The shipping weight is 51 lb. Put it together near where it will stand, then level it with the feet.
Before You Order
- Measure the space: 36" wide and 30" deep.
- Check the aisle space left behind the table.
- Decide whether you need a flat top or a raised back for a wall.
- Check what goes underneath against the 24" x 30" undershelf.
- Decide on the WA400001 casters now if you want them.
Frequently Asked Questions
What size is the Atosa ST3036EC?
36" wide, 30" deep and 34" high.
How much weight does it hold?
Atosa lists 470 lb on the top and 350 lb on the undershelf.
What is it made of?
18 gauge, 430 stainless steel, including the top, undershelf and legs.
Is the undershelf adjustable?
Yes. It measures 24" x 30".
Can I add casters?
Yes. The WA400001 caster set fits it: 4 casters, 5" high, with 1-1/2" expanding stems.
Does it come assembled?
No. It ships knocked down. Atosa says it is easy to assemble.
Is it NSF listed?
Yes. The Atosa spec sheet shows the NSF mark.
What is the warranty?
90 days on workmanship.