Skip to content

BK Resources VTS-1884 Galvanized Work Table Undershelf for 84" x 18" Tables

Original price $193.00 - Original price $193.00
Original price
$193.00
$193.00 - $193.00
Current price $193.00

The BK Resources VTS-1884 is a replacement or extra undershelf for BK Resources 84" x 18" work tables, made of galvanized steel. The shelf itself measures 77.5" x 10" and BK rates it at 600 lb. BK Resources list price is $193.

Key Specs at a Glance

Model VTS-1884
Fits BK Resources 84" L x 18" W work tables
Shelf size 77.5" x 10" (BK spec sheet)
Material galvanized steel
Capacity 600 lb, evenly distributed (BK spec sheet)
Mounting Corner braces that clamp to 1-5/8" tube legs, adjustable in height
Construction Two pieces with center support for 84" and 96" tables
List price $193

What It Is For

An undershelf turns the space under a work table into storage for bins, stock pots, sheet pans and boxed product. The VTS-1884 fits BK Resources tables that are 84" long and 18" deep. Use it to replace a bent, rusted or lost shelf, or to add a second shelf lower on the legs for more storage.

The corner braces clamp around the legs, so the shelf can be set at the height you need. Leave enough clearance above the shelf for your tallest container, and keep the lowest shelf high enough to clean under.

Galvanized Steel

Galvanized steel is zinc-coated carbon steel. It is the economical choice for dry storage under a prep table. It can rust if it stays wet or is cleaned with harsh chemicals, so wipe it dry in wet areas. If the shelf will see water, choose the matching stainless steel shelf.

BK Tables This Shelf Fits

These BK Resources 84" x 18" tables use a galvanized undershelf of this size:

Other Galvanized Undershelves at 18" Deep

Model Fits table Capacity List price
VTS-1824 24" x 18" 400 lb $106
VTS-1830 30" x 18" 400 lb $118
VTS-1836 36" x 18" 400 lb $128
VTS-1848 48" x 18" 300 lb $136
VTS-1860 60" x 18" 150 lb $149
VTS-1872 72" x 18" 100 lb $170
VTS-1884 84" x 18" 600 lb $193
VTS-1896 96" x 18" 600 lb $211

Installing the Shelf

Clear the table and loosen the existing shelf braces if you are replacing a shelf. Slide the corner braces onto the legs, set the height, and tighten each brace evenly so the shelf sits level. On 84" and 96" tables the shelf comes in two pieces that meet at the center pair of legs. Load the shelf evenly and keep the heaviest items near the legs.

What to Store Underneath

  • Bins of dry goods and ingredients.
  • Stock pots, hotel pans and sheet pans.
  • Small appliances you use now and then.
  • Boxed product and packaging.

Cleaning and Care

  • Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
  • Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
  • Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
  • Check the feet and fasteners now and then and re-level the table if it starts to rock.

Before You Order

  • Measure your table: this shelf fits 84" long by 18" deep BK Resources tables.
  • Check the legs are 1-5/8" round tube legs.
  • Choose stainless steel for wet areas, galvanized for dry storage.
  • Keep the load to 600 lb, spread evenly.

Documents

Frequently Asked Questions

What size tables does the VTS-1884 fit?

BK Resources work tables 84" long and 18" deep.

What is it made of?

Galvanized steel.

How much weight does it hold?

BK lists 600 lb, evenly distributed.

Is it adjustable?

Yes. The corner braces clamp to the legs at the height you choose.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare