Skip to content

Casters

Commercial Casters for Work Tables, Equipment Stands and Racks

Shop commercial casters and work table casters from BK Resources and Atosa. Add casters to a table, stand or rack so it rolls out for cleaning behind and under it, or moves when you change a layout.

Choose an expanding stem caster for hollow tubular legs, a threaded stem caster for threaded sockets, or a plate caster to bolt to a flat base. Casters are sold singly and in sets of 4, with or without brakes.

  • Expanding stems in 1", 1-1/4", 1-1/2", 1-5/8" and 2"
  • Threaded stems in 1/2"-13, 5/8"-11 and 3/4"-10
  • 3", 4" and 5" wheels in polyurethane, gray rubber, hard rubber, polyolefin and phenolic
  • Top lock and total lock brake options
  • BK rates its casters at 200 lb to 500 lb each

Filters

Atosa WA400001 Expanding Stem Casters, 5" H, 1-1/2" Stem, Set of 4

The Atosa WA400001 is a set of 4 expanding stem casters, 5" high, with a 1-1/2" stem. Atosa lists them as an option for Mixrite work tables in the ...

View full details

Casters let you roll a work table, equipment stand or rack out to clean behind and under it, or move it to change a layout. This page has 405 commercial casters: BK Resources casters sold singly and in sets of 4, and the Atosa caster set for Mixrite tables. The right caster depends on how it attaches to your equipment, so start there.

Stem or Plate

MountHow it attachesModels
Expanding stemSlides into a hollow round leg and expands to grip the inside. Used on most tubular-leg work tables and stands.235
Threaded stemScrews into a threaded socket in the leg or frame.103
PlateBolts to a flat surface through a top plate.58
Pop-in stemPushes into a socket.7

Expanding Stem Sizes

An expanding stem has to match the inside of the leg. BK makes expanding stems in these sizes:

Code in modelStem size
RA1-5/8"
1RA1"
2RA1-1/4"
3RA1-1/2"
4RA2"

BK work tables use 1-5/8" diameter legs. For example, 5SBR-RA-PLY-TLB is a 5" polyurethane caster with a 1-5/8" expanding stem and a top lock brake.

Threaded Stem Sizes

Code in modelThread
4ST1/2"-13 x 1"
5ST5/8"-11 x 1"
6ST3/4"-10 x 1"
15ST1/2" x 3/4"

Wheel Materials

The last letters of the model name the wheel:

  • PLY, polyurethane: Polyurethane is a non-marking tread that BK rates as resistant to acids and caustics. It rolls smoothly and quietly and suits most kitchen floors, including tile and sealed concrete.
  • GR, gray rubber: Gray rubber is a non-marking, cushioned tread. BK rates it as resistant to oil, grease, water and most solvents. The softer tread absorbs bumps and is gentle on floors.
  • HR, hard rubber: Hard rubber is a high-impact molded tread with a nylon bearing sleeve. BK rates it for -40° to 160°F. It is a durable, economical choice for general use.
  • LDP, polyolefin: Polyolefin is a hard, non-marking tread that BK rates as resistant to chemicals and solvents. Hard treads roll easily under load on smooth floors.
  • PH, phenolic: Phenolic is a hard tread that BK rates as resistant to oil and grease. It rolls smoothly and quietly under heavy loads.

Each product page lists the temperature range and load rating BK gives for that wheel.

Wheel Diameter and Load

BK casters come in 3", 4" and 5" wheels. The first number in the model is the wheel: 3SBR is a 3" wheel, 5SBR a 5" wheel. A larger wheel rolls more easily over floor drains, grout lines and thresholds, but it raises the table more. BK rates its casters from 200 lb to 500 lb each, depending on the model. Divide the total loaded weight by the number of casters to check the rating.

Brakes

CodeBrakeWhat it does
TLBTop lock brakeA lever locks the wheel.
TTBTotal lock brakeLocks both the wheel and the swivel, so the caster cannot roll or turn.
No codeNo brakeRolls and swivels freely.

Sets ending in PS4 are 4 casters. Check each product page for which casters in the set have brakes.

Atosa Casters

The Atosa WA400001 is a set of 4 expanding stem casters, 5" high, with a 1-1/2" stem. Atosa lists it for Mixrite work tables in the 24 and 30 Inch Series and Mixrite equipment stands in the 30 and 36 Inch Series.

How to Measure

  1. Check how the current feet attach: a foot that slides into a hollow leg means an expanding stem; a foot that screws in means a threaded stem.
  2. For an expanding stem, measure the inside diameter of the leg, or match the leg size the maker lists.
  3. For a threaded stem, match the thread size and length.
  4. Count the legs. A 6-leg table needs 6 casters.
  5. Check the height change against shelves and windows above the table.
  6. For gas equipment on casters, follow the equipment maker's instructions and local code for the gas connection and restraint.

Frequently Asked Questions

What size stem fits a BK work table?

BK work tables use 1-5/8" legs, which take the RA expanding stem casters.

What is the difference between a top lock and a total lock brake?

A top lock brake stops the wheel. A total lock brake stops the wheel and the swivel.

What does PS4 mean?

A set of 4 casters.

Which wheel is best for a kitchen?

BK describes polyurethane as suiting most kitchen floors, including tile and sealed concrete. Gray rubber is a cushioned, non-marking tread that BK rates as resistant to oil, grease and water.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare