BK Resources VETS-1530 Stainless Steel Equipment Stand 16" x 30" x 24", Galvanized Legs and Undershelf
The BK Resources VETS-1530 is a 16" x 30" equipment stand with an 18 gauge T-430 stainless steel top reinforced with 1-1/2" square tubing, a 2" riser with a hemmed edge on three sides, 4 galvanized legs and an adjustable galvanized undershelf. The work surface is 24" high, sized for countertop cooking equipment. BK rates the top at 1,072 lb. BK Resources list price is $340.
Key Specs at a Glance
| Model | VETS-1530 |
| Size | 16" L x 30" W, 24" work surface height |
| Top | 18 gauge T-430 stainless steel, reinforced with 1-1/2" square tubing |
| Riser | 2" on back and sides, hemmed edge |
| Base | 4 galvanized legs, adjustable undershelf with cast aluminum corners |
| Feet | Metal over plastic bullet feet |
| Top capacity | 1,072 lb (BK spec sheet) |
| Weight | 38 lb (BK spec sheet) |
| List price | $340 |
What an Equipment Stand Is For
Countertop griddles, charbroilers, hot plates, fryers and ovens are built to sit on a stand at about 24", so the cooking surface ends up at a comfortable working height. A standard 34-3/4" work table would put the cooking surface too high. The 2" riser on three sides keeps equipment from sliding off the back or sides, and the undershelf holds pans, oil and supplies.
Matching the Stand to Your Equipment
Measure the width and depth of the equipment, including its feet, and choose a stand at least that size. Check the equipment manufacturer's clearance requirements to walls and combustible surfaces. Add up the weight of everything that will sit on the top and keep it within BK's 1,072 lb rating.
Add a work shelf in front of the equipment with the EQ-WS15 ($402), and a plate shelf below it with the EQ-PS15.
Compare Sizes
| Model | Length | Top capacity | List price |
|---|---|---|---|
| VETS-1530 | 16" | 1,072 lb | $340 |
| VETS-1830 | 19" | 1,072 lb | $380 |
| VETS-2430 | 25" | 1,072 lb | $459 |
| VETS-3630 | 37" | 1,072 lb | $600 |
| VETS-4830 | 49" | 1,072 lb | $702 |
| VETS-6030 | 61" | 1,072 lb | $822 |
| VETS-7230 | 73" | 755 lb | $922 |
Casters and Feet
BK lists casters and upgraded bullet feet as options for its stands. Casters let you roll the equipment out for cleaning; use locking casters and a restraining device where the equipment is connected to gas, and follow the equipment manufacturer's instructions.
Cleaning and Care
- Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
- Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
- Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
- Check the feet and fasteners now and then and re-level the table if it starts to rock.
Before You Order
- Measure the equipment: this stand is 16" x 30".
- Keep the load within 1,072 lb on the top.
- Check clearances to walls and combustibles for your equipment.
Documents
Frequently Asked Questions
How tall is it?
The work surface is 24" high.
How much weight does the top hold?
BK lists 1,072 lb.
What is the top made of?
18 gauge T-430 stainless steel, reinforced with 1-1/2" square tubing.