BK Resources SVTS-9630 Stainless Steel Work Table Undershelf for 96" x 30" Tables
The BK Resources SVTS-9630 is a replacement or extra undershelf for BK Resources 96" x 30" work tables, made of T-430 stainless steel. The shelf itself measures 89.5" x 22" and BK rates it at 600 lb. BK Resources list price is $634.
Key Specs at a Glance
| Model | SVTS-9630 |
| Fits | BK Resources 96" L x 30" W work tables |
| Shelf size | 89.5" x 22" (BK spec sheet) |
| Material | T-430 stainless steel |
| Capacity | 600 lb, evenly distributed (BK spec sheet) |
| Mounting | Corner braces that clamp to 1-5/8" tube legs, adjustable in height |
| Construction | Two pieces with center support for 84" and 96" tables |
| List price | $634 |
What It Is For
An undershelf turns the space under a work table into storage for bins, stock pots, sheet pans and boxed product. The SVTS-9630 fits BK Resources tables that are 96" long and 30" deep. Use it to replace a bent, rusted or lost shelf, or to add a second shelf lower on the legs for more storage.
The corner braces clamp around the legs, so the shelf can be set at the height you need. Leave enough clearance above the shelf for your tallest container, and keep the lowest shelf high enough to clean under.
Stainless Steel
T-430 stainless steel stands up to moisture and cleaning chemicals better than galvanized steel, so it suits dish areas, wet prep and kitchens that wash down often.
The galvanized version for the same size is the VTS-9630 ($394).
BK Tables This Shelf Fits
These BK Resources 96" x 30" tables use a stainless steel undershelf of this size:
- SVT-9630: Flat Tables ($1,320)
- SVTR-9630: 1.5" Riser Tables ($1,320)
- SVTR5-9630: 5" Riser Tables ($1,487)
Other Stainless Undershelves at 30" Deep
| Model | Fits table | Capacity | List price |
|---|---|---|---|
| SVTS-3030 | 30" x 30" | 400 lb | $225 |
| SVTS-3630 | 36" x 30" | 400 lb | $254 |
| SVTS-4830 | 48" x 30" | 300 lb | $316 |
| SVTS-6030 | 60" x 30" | 150 lb | $401 |
| SVTS-7230 | 72" x 30" | 100 lb | $465 |
| SVTS-8430 | 84" x 30" | 600 lb | $508 |
| SVTS-9630 | 96" x 30" | 600 lb | $634 |
Installing the Shelf
Clear the table and loosen the existing shelf braces if you are replacing a shelf. Slide the corner braces onto the legs, set the height, and tighten each brace evenly so the shelf sits level. On 84" and 96" tables the shelf comes in two pieces that meet at the center pair of legs. Load the shelf evenly and keep the heaviest items near the legs.
What to Store Underneath
- Bins of dry goods and ingredients.
- Stock pots, hotel pans and sheet pans.
- Small appliances you use now and then.
- Boxed product and packaging.
Cleaning and Care
- Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
- Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
- Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
- Check the feet and fasteners now and then and re-level the table if it starts to rock.
Before You Order
- Measure your table: this shelf fits 96" long by 30" deep BK Resources tables.
- Check the legs are 1-5/8" round tube legs.
- Choose stainless steel for wet areas, galvanized for dry storage.
- Keep the load to 600 lb, spread evenly.
Documents
Frequently Asked Questions
What size tables does the SVTS-9630 fit?
BK Resources work tables 96" long and 30" deep.
What is it made of?
T-430 stainless steel.
How much weight does it hold?
BK lists 600 lb, evenly distributed.
Is it adjustable?
Yes. The corner braces clamp to the legs at the height you choose.