Skip to content

BK Resources SVTS-7224 Stainless Steel Work Table Undershelf for 72" x 24" Tables

Original price $334.00 - Original price $334.00
Original price
$334.00
$334.00 - $334.00
Current price $334.00

The BK Resources SVTS-7224 is a replacement or extra undershelf for BK Resources 72" x 24" work tables, made of T-430 stainless steel. The shelf itself measures 65.5" x 16" and BK rates it at 100 lb. BK Resources list price is $334.

Key Specs at a Glance

Model SVTS-7224
Fits BK Resources 72" L x 24" W work tables
Shelf size 65.5" x 16" (BK spec sheet)
Material T-430 stainless steel
Capacity 100 lb, evenly distributed (BK spec sheet)
Mounting Corner braces that clamp to 1-5/8" tube legs, adjustable in height
List price $334

What It Is For

An undershelf turns the space under a work table into storage for bins, stock pots, sheet pans and boxed product. The SVTS-7224 fits BK Resources tables that are 72" long and 24" deep. Use it to replace a bent, rusted or lost shelf, or to add a second shelf lower on the legs for more storage.

The corner braces clamp around the legs, so the shelf can be set at the height you need. Leave enough clearance above the shelf for your tallest container, and keep the lowest shelf high enough to clean under.

Stainless Steel

T-430 stainless steel stands up to moisture and cleaning chemicals better than galvanized steel, so it suits dish areas, wet prep and kitchens that wash down often.

The galvanized version for the same size is the VTS-7224 ($199).

BK Tables This Shelf Fits

These BK Resources 72" x 24" tables use a stainless steel undershelf of this size:

Other Stainless Undershelves at 24" Deep

Model Fits table Capacity List price
SVTS-2424 24" x 24" 400 lb $157
SVTS-3024 30" x 24" 400 lb $175
SVTS-3624 36" x 24" 400 lb $193
SVTS-4824 48" x 24" 300 lb $250
SVTS-6024 60" x 24" 150 lb $298
SVTS-7224 72" x 24" 100 lb $334
SVTS-8424 84" x 24" 600 lb $381
SVTS-9624 96" x 24" 600 lb $439

Installing the Shelf

Clear the table and loosen the existing shelf braces if you are replacing a shelf. Slide the corner braces onto the legs, set the height, and tighten each brace evenly so the shelf sits level. On 84" and 96" tables the shelf comes in two pieces that meet at the center pair of legs. Load the shelf evenly and keep the heaviest items near the legs.

What to Store Underneath

  • Bins of dry goods and ingredients.
  • Stock pots, hotel pans and sheet pans.
  • Small appliances you use now and then.
  • Boxed product and packaging.

Cleaning and Care

  • Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
  • Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
  • Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
  • Check the feet and fasteners now and then and re-level the table if it starts to rock.

Before You Order

  • Measure your table: this shelf fits 72" long by 24" deep BK Resources tables.
  • Check the legs are 1-5/8" round tube legs.
  • Choose stainless steel for wet areas, galvanized for dry storage.
  • Keep the load to 100 lb, spread evenly.

Documents

Frequently Asked Questions

What size tables does the SVTS-7224 fit?

BK Resources work tables 72" long and 24" deep.

What is it made of?

T-430 stainless steel.

How much weight does it hold?

BK lists 100 lb, evenly distributed.

Is it adjustable?

Yes. The corner braces clamp to the legs at the height you choose.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare