Skip to content

BK Resources SVET-3630 Stainless Steel Equipment Stand 37" x 30" x 24", Stainless Legs and Undershelf

Original price $1,058.00 - Original price $1,058.00
Original price
$1,058.00
$1,058.00 - $1,058.00
Current price $1,058.00

The BK Resources SVET-3630 is a 37" x 30" equipment stand with an 18 gauge T-430 stainless steel top reinforced with 1-1/2" square tubing, a 2" riser with a hemmed edge on three sides, 4 stainless steel legs and an adjustable stainless steel undershelf. The work surface is 24" high, sized for countertop cooking equipment. BK rates the top at 1,072 lb. BK Resources list price is $1,058.

Key Specs at a Glance

Model SVET-3630
Size 37" L x 30" W, 24" work surface height
Top 18 gauge T-430 stainless steel, reinforced with 1-1/2" square tubing
Riser 2" on back and sides, hemmed edge
Base 4 stainless steel legs, adjustable undershelf with cast aluminum corners
Feet Metal over plastic bullet feet
Top capacity 1,072 lb (BK spec sheet)
Weight 64 lb (BK spec sheet)
List price $1,058

What an Equipment Stand Is For

Countertop griddles, charbroilers, hot plates, fryers and ovens are built to sit on a stand at about 24", so the cooking surface ends up at a comfortable working height. A standard 34-3/4" work table would put the cooking surface too high. The 2" riser on three sides keeps equipment from sliding off the back or sides, and the undershelf holds pans, oil and supplies.

Matching the Stand to Your Equipment

Measure the width and depth of the equipment, including its feet, and choose a stand at least that size. Check the equipment manufacturer's clearance requirements to walls and combustible surfaces. Add up the weight of everything that will sit on the top and keep it within BK's 1,072 lb rating.

Add a work shelf in front of the equipment with the EQ-WS36 ($657), and a plate shelf below it with the EQ-PS36.

The galvanized base version is the VETS-3630 ($600).

Compare Sizes

Model Length Top capacity List price
SVET-2430 25" 1,072 lb $963
SVET-3630 37" 1,072 lb $1,058
SVET-4830 49" 1,072 lb $1,269
SVET-6030 61" 1,072 lb $1,481
SVET-7230-6 73" 2,145 lb $1,776

Casters and Feet

BK lists casters and upgraded bullet feet as options for its stands. Casters let you roll the equipment out for cleaning; use locking casters and a restraining device where the equipment is connected to gas, and follow the equipment manufacturer's instructions.

Cleaning and Care

  • Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
  • Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
  • Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
  • Check the feet and fasteners now and then and re-level the table if it starts to rock.

Before You Order

  • Measure the equipment: this stand is 37" x 30".
  • Keep the load within 1,072 lb on the top.
  • Check clearances to walls and combustibles for your equipment.

Documents

Frequently Asked Questions

How tall is it?

The work surface is 24" high.

How much weight does the top hold?

BK lists 1,072 lb.

What is the top made of?

18 gauge T-430 stainless steel, reinforced with 1-1/2" square tubing.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare