Atosa Mixrite ST2472EC Stainless Steel Work Table 24 x 72, Flat Top, Undershelf, NSF
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa Mixrite ST2472EC is a 72" wide, 24" deep stainless steel work table with a flat top and an adjustable undershelf. It stands 34" high. It is built from 18 gauge, 430 stainless steel, and Atosa rates it at 500 lb on the top and 380 lb on the undershelf. It is NSF listed and ships knocked down.
Key Specs at a Glance
| Model | ST2472EC |
| Size | 72" W x 24" D x 34" H |
| Top | Flat, satin finish, sound deadened, all edges turned down |
| Steel | 18 gauge, 430 stainless steel top, undershelf and legs |
| Undershelf | Stainless steel, adjustable height, 66" x 18" (as Atosa lists) |
| Capacity | 500 lb top, 380 lb undershelf (as Atosa lists) |
| Legs and feet | 4 stainless steel tubular legs, 1-5/8", with 1" adjustable bullet feet |
| Weight | 66 lb net, 72 lb shipping |
| Certification | NSF |
| Warranty | 90 days on workmanship |
The 24 x 72 Size
The ST2472EC is the longest table in the 24 Inch Series, at 72" wide on 4 legs. Choose it when you want a 6' run of work surface but only have room for a 24" deep table, for example along one wall of a narrow kitchen. Atosa rates it at 500 lb on the top, the highest in the 24" deep flat top line, and lists the MROS-6RE double overshelf for it.
The top gives you 1,728 square inches of work surface, about 12 square feet. Before you order, measure the space: you need 72" of width, and the table comes 24" out from the wall. Check how much aisle space is left behind anyone standing at the table.
Choosing the Depth
A 24" deep table takes up the least floor space. It suits narrow kitchens, wall-side runs and spots where the aisle behind you has to stay clear. The trade-off is less room front to back for boards, pans and containers.
The Flat Top
The top is flat edge to edge, with no backsplash or raised rear edge. That makes it the right choice when the table stands away from a wall, sits in an open area, or gets worked from more than one side. You can slide pans, boards and boxes on and off from any edge.
Atosa polishes the whole top to a satin finish and sound deadens it, which reduces the ringing noise of tools and pans set down on bare steel. All edges are turned down, so there is no sharp cut edge where staff lean or reach.
If the table will stand against a wall, look at the ST2472ECB4 (4" backsplash) or ST2472ECR2 (2" rear edge). It is the same 24 x 72 size with a raised back to keep spills and small items from falling behind the table.
Height and Clearance
The work surface is 34" high. The optional WA400001 casters are 5" high and will raise the table if you add them. If the table will slide under a shelf or counter overhang, measure that clearance first.
The Undershelf
The undershelf is stainless steel and adjusts in height. Atosa lists it at 66" x 18", rated at 380 lb. Use it for bins, bowls, sheet pans and boxed product. Measure your tallest item before you set the height: a lower shelf gives more clearance, a higher shelf keeps items closer to hand.
Load Ratings
Atosa lists 500 lb on the top and 380 lb on the undershelf. Treat those as limits. Spread heavy items out and keep the heaviest near the legs.
Legs and Leveling
The ST2472EC stands on 4 stainless steel tubular legs, 1-5/8" in diameter, with 1" adjustable bullet feet. Use the feet to level it on an uneven floor so it does not rock.
Add-Ons
Sold separately:
- WA400001 caster set: 4 casters, 5" high, with 1-1/2" expanding stems. Casters let you roll it out to clean behind and under it.
- MROS-6RE double overshelf: Atosa lists this overshelf for the ST2472EC. It adds storage above the work surface.
Compare Nearby Sizes
Here is how the ST2472EC compares with the other 24" deep flat top tables:
| Model | Size (W x D) | Legs | Top capacity |
|---|---|---|---|
| ST2424EC | 24" x 24" | 4 | 400 lb |
| ST2430EC | 30" x 24" | 4 | 400 lb |
| ST2436EC | 36" x 24" | 4 | 430 lb |
| ST2448EC | 48" x 24" | 4 | 460 lb |
| ST2460EC | 60" x 24" | 4 | 480 lb |
| ST2472EC | 72" x 24" | 4 | 500 lb |
- Smaller: ST2460EC, 60" wide.
- Same width at 30" deep: ST3072EC (larger top).
- Same width at 36" deep: ST3672EC (larger top).
Assembly
The ST2472EC ships knocked down (KD), and Atosa says it is easy to assemble. The shipping weight is 72 lb. Put it together near where it will stand, then level it with the feet.
Before You Order
- Measure the space: 72" wide and 24" deep.
- Check the aisle space left behind the table.
- Decide whether you need a flat top or a raised back for a wall.
- Check what goes underneath against the 66" x 18" undershelf.
- Decide on the WA400001 casters now if you want them.
Frequently Asked Questions
What size is the Atosa ST2472EC?
72" wide, 24" deep and 34" high.
How much weight does it hold?
Atosa lists 500 lb on the top and 380 lb on the undershelf.
What is it made of?
18 gauge, 430 stainless steel, including the top, undershelf and legs.
Is the undershelf adjustable?
Yes. It measures 66" x 18".
Does it have a backsplash?
No. It has a flat top. For a 4" backsplash, see the ST2472ECB4.
Can I add casters?
Yes. The WA400001 caster set fits it: 4 casters, 5" high, with 1-1/2" expanding stems.
Does it come assembled?
No. It ships knocked down. Atosa says it is easy to assemble.
Is it NSF listed?
Yes. The Atosa spec sheet shows the NSF mark.
What is the warranty?
90 days on workmanship.