Skip to content

BK Resources MST-2424SS Stainless Steel Machine Stand 24"x24", 14 Ga T-304, Marine Edge, Stainless Base

Original price $1,034.00 - Original price $1,034.00
Original price
$1,034.00
$1,034.00 - $1,034.00
Current price $1,034.00

The BK Resources MST-2424SS is a 24" x 24" machine stand with a 14 gauge T-304 stainless steel top, a marine edge, stainless steel legs and an adjustable stainless steel undershelf. It stands 19-5/8" high, sized for mixers, slicers and other heavy countertop machines, and BK rates the top at 1,072 lb. BK Resources list price is $1,034.

Key Specs at a Glance

Model MST-2424SS
Size 24" x 24", 19-5/8" high
Top 14 gauge T-304 stainless steel, marine edge, reinforced with square tubing welded as a C channel
Base Stainless steel 1-5/8" legs, adjustable undershelf with cast aluminum corners
Feet Stainless steel bullet feet
Top capacity 1,072 lb (BK spec sheet)
Weight 39.5 lb (BK spec sheet)
List price $1,034

Why a Machine Stand

Heavy machines like floor-standing mixers, slicers and meat grinders need a low, rigid base. At 19-5/8", a machine stand puts a mixer bowl or slicer at a workable height without lifting heavy parts overhead. The 14 gauge T-304 top is much heavier than a work table top, and the marine edge (a raised rim) keeps liquids and small parts on the stand.

Compare Sizes

Model Size List price
MST-2424SS 24" x 24" $1,034
MST-3024SS 30" x 24" $1,124
MST-3030SS 30" x 30" $1,219
MST-3630SS 36" x 30" $1,314

Placement and Safety

Set the stand on a level floor and level it with the feet before you put a machine on it. Keep the machine centered over the frame, leave clear space around moving parts, and make sure the power cord reaches the outlet without stretching across a walkway. Unplug the machine before cleaning.

Cleaning and Care

  • Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
  • Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
  • Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
  • Check the feet and fasteners now and then and re-level the table if it starts to rock.

Before You Order

  • Measure the machine footprint: this stand is 24" x 24".
  • Check the machine weight against the 1,072 lb top rating.
  • Leave room around the machine for operation and cleaning.

Documents

Frequently Asked Questions

How tall is it?

19-5/8".

What gauge is the top?

14 gauge T-304 stainless steel.

How much weight does it hold?

BK lists 1,072 lb on the top.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare