BK Resources HST-2430-1014-SS Filler Table with Drop-In Hand Sink 24" x 30", Faucet, NSF
The BK Resources HST-2430-1014-SS is a 24" x 30" stainless steel filler table with a drop-in 10" x 14" x 5" deep hand sink, side splashes and a deck mount faucet with a 3-1/2" gooseneck spout. It stands 41-3/4" high overall, has a 1-1/2" rear riser, stainless steel legs and an adjustable undershelf, ships knocked down and is NSF listed. BK Resources list price is $1,952.
Key Specs at a Glance
| Model | HST-2430-1014-SS |
| Size | 24" L x 30" W, 41-3/4" overall height |
| Top | 18 gauge, 400-series stainless steel, 1-1/2" rear riser |
| Hand sink | 10" x 14" x 5" deep drop-in bowl with side splashes, 3-1/2" basket drain |
| Faucet | Deck mount, 3-1/2" gooseneck spout, included |
| Base | Stainless steel legs, adjustable undershelf |
| Certification | NSF |
| Shipping | Ships knocked down |
| List price | $1,952 |
What a Filler Table Does
A filler table closes the gap between two pieces of equipment on a cooking line, or between equipment and a wall, so there is no open slot for food and grease to fall into. At 24" wide it gives you a landing spot for plates, pans and tools right where you need it.
The drop-in hand sink adds a place to wash hands right at the line without giving up a full-size sink footprint. The side splashes keep water off the equipment beside it. A plumber will need to connect the water and drain; check your local health code for hand sink placement.
Compare Sizes
| Model | Size (L x W) | List price |
|---|---|---|
| HST-1530-1014-SS | 15" x 30" | $1,869 |
| HST-1830-1014-SS | 18" x 30" | $1,898 |
| HST-2430-1014-SS | 24" x 30" | $1,952 |
Installing a Sink Table
Set the table in place and level it with the feet before the plumber connects anything, so the bowl drains fully and the top sits even. Most jurisdictions require a licensed plumber for the water supply and the drain, and many require an indirect drain or air gap for food prep sinks. Ask your plumber and health inspector what applies to your kitchen before you order.
Where It Fits
- Produce washing and trimming.
- Thawing under running water.
- Seafood, poultry and meat prep that needs a sink close by.
- Bars, cafes and commissaries that need a wet prep station in a small footprint.
Sink Table or Work Table Plus a Separate Sink?
A sink table puts the bowl and the work surface in one footprint, so washed product goes straight onto the prep area and liquids drain back into the bowl. A separate sink and work table gives more flexibility in layout, but takes more floor space and leaves a seam where water can get between them. For tight kitchens and wet prep, a one-piece sink table is usually the cleaner choice.
Cleaning and Care
- Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
- Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
- Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
- Check the feet and fasteners now and then and re-level the table if it starts to rock.
Before You Order
- Measure the gap: this filler is 24" wide and 30" deep.
- Check the height of the equipment on each side.
- Plan for a plumber to connect water and drain.
Documents
Frequently Asked Questions
What size is the HST-2430-1014-SS?
24" wide and 30" deep.
What is a filler table?
A narrow table that fills the gap between equipment or between equipment and a wall.
Is the faucet included?
Yes, a deck mount faucet with a 3-1/2" gooseneck spout.