Skip to content

BK Resources EETS-1530 Economy Stainless Steel Equipment Stand 15" x 30" x 23", Galvanized Legs and Undershelf

Original price $310.00 - Original price $310.00
Original price
$310.00
$310.00 - $310.00
Current price $310.00

The BK Resources EETS-1530 is an economy 15" x 30" equipment stand with an 18 gauge T-430 stainless steel top, a 1-1/2" riser with a hemmed edge on three sides, galvanized 1-5/8" legs, an adjustable galvanized undershelf and adjustable stainless steel feet. The work surface is 23" high. BK rates the top at 540 lb and the shelf at 400 lb. BK Resources list price is $310.

Key Specs at a Glance

Model EETS-1530
Size 15" L x 30" W x 23" H
Top 18 gauge T-430 stainless steel, reinforced with 4-1/2" x 3/4" support channels
Riser 1-1/2" on back and sides, hemmed edge
Base Galvanized 1-5/8" legs and adjustable undershelf
Feet Adjustable stainless steel
Top capacity 540 lb (BK spec sheet)
Shelf capacity 400 lb (BK spec sheet)
Weight 30 lb (BK spec sheet)
List price $310

Economy or Standard Stand?

The EETS economy stand costs less than BK's SVET and VETS stands and is rated lower: 540 lb on the top versus 1,072 lb for most standard stands. It also stands at 23" instead of 24" and has a 1-1/2" riser instead of 2". Choose the economy stand for lighter countertop equipment, and a standard stand for heavy griddles, charbroilers and ovens. BK's EQ work shelves do not fit EETS units.

What an Equipment Stand Is For

Countertop cooking equipment is built to sit on a low stand so the cooking surface ends up at a comfortable height. The riser keeps equipment from sliding off the back or sides, and the undershelf holds pans, oil and supplies.

Compare Sizes

Model Size Top capacity List price
EETS-1530 15" x 30" 540 lb $310
EETS-1830 18" x 30" 540 lb $335
EETS-2430 24" x 30" 540 lb $291
EETS-3630 36" x 30" 540 lb $368
EETS-4830 48" x 30" 540 lb $440
EETS-6030 60" x 30" 540 lb $576
EETS-7230 72" x 30" 380 lb $659

Casters and Feet

BK lists casters and upgraded bullet feet as options for its stands. Casters let you roll the equipment out for cleaning; use locking casters and a restraining device where the equipment is connected to gas, and follow the equipment manufacturer's instructions.

Cleaning and Care

  • Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
  • Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
  • Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
  • Check the feet and fasteners now and then and re-level the table if it starts to rock.

Before You Order

  • Measure the equipment: this stand is 15" x 30".
  • Keep the top load within 540 lb and the shelf within 400 lb.
  • Choose an SVET or VETS stand for heavier equipment.

Documents

Frequently Asked Questions

How tall is it?

23" to the work surface.

How much weight does it hold?

BK lists 540 lb on the top and 400 lb on the shelf.

Do EQ work shelves fit?

No. BK's EQ work shelves do not fit EETS units.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare