BK Resources CVTR5OB-7230 Stainless Steel Work Table 72" x 30", 16 Ga T-304, 5" Backsplash, Open Base, Stainless Legs
The BK Resources CVTR5OB-7230 is a 72" long, 30" deep stainless steel work table with a 16 gauge T-304 stainless steel top with a 5" backsplash, an open base with stainless steel side and rear bracing and 4 stainless steel legs. The work surface is 34-3/4" high, and the backsplash brings the overall height to 39-3/4". BK Resources list price is $2,434.
Key Specs at a Glance
| Model | CVTR5OB-7230 |
| Size | 72" L x 30" W, 34-3/4" work surface height, 39-3/4" overall |
| Top | 16 gauge T-304 stainless steel, 5" backsplash |
| Reinforcement | Two 2" rectangular steel tubes welded under the top |
| Base | Open base, stainless steel side and rear bracing |
| Legs | 4 legs, 1-5/8" diameter, stainless steel |
| Feet | Stainless steel bullet feet |
| Capacity | 1,200 lb, evenly distributed (BK spec sheet) |
| Product weight | 122 lb (BK spec sheet) |
| Shipping | Ships knocked down (KD) for assembly on site |
| List price | $2,434 |
The 72 x 30 Size
The top measures 72" x 30", which gives you 2,160 square inches of work surface, about 15.0 square feet. That is room for two people to work side by side, or one long station with prep at one end and packing or plating at the other.
At 30" deep, it is the deepest standard size in most BK lines. It holds a full sheet pan front to back with room to spare, which suits baking, staging and larger prep. Measure the space before you order: you need 72" of clear length and the table comes 30" out from the wall. Check how much aisle space is left behind anyone standing at it.
The 5" Backsplash
A 5" backsplash runs along the back edge of the top. The backsplash is tall enough to protect the wall from splashes and to give pans and containers a back stop. It is made for a table that stands against a wall.
Same size, same base, different top: CVTOB-7230 (flat top, $2,261).
Check the height above the table. With the backsplash, it stands 39-3/4" tall at the back, so you need more than that under a wall shelf, window or pass-through.
16 Gauge T-304 Stainless Steel
16 gauge is thicker than 18 gauge. The lower the gauge number, the thicker the steel, so a 16 gauge top dents less and handles heavier equipment and pounding. T-304 is an austenitic stainless steel with nickel in it. It holds up better than T-430 against moisture, salt, acidic foods and harsh cleaners, so it suits wet areas, seafood and produce prep, and kitchens that wash down often.
Under the top, BK welds two 2" rectangular steel tubes to keep the work surface level under load and cut down the ringing of pans set down on bare steel.
The Open Base
Instead of an undershelf, the legs are tied together with stainless steel bracing on the sides and back. That leaves the space under the table open from the front, so you can roll in carts, bins on dollies, mobile ingredient bins or a trash can, or fit undercounter equipment.
The open base and back-edge riser make this a common choice in front of a wall where a cart or bins slide in underneath.
Prefer an undershelf? The CVTR5-7230 is the same size and top for $2,163.
Legs, Feet and Leveling
The CVTR5OB-7230 stands on 4 stainless steel legs, 1-5/8" in diameter. The feet are stainless steel bullet feet. Use them to level the table on a sloped or uneven floor so it does not rock, and so the back sits evenly against the wall.
If the table needs to move for cleaning, BK makes casters for its 1-5/8" tube legs. Check the stem type on the caster against your leg before you order.
Load Rating
BK rates this open base series at 1,200 lb, evenly distributed. Spread heavy equipment out and keep it near the legs.
Every BK 72 x 30 Work Table
BK makes this 72 x 30 size in 16 versions. They differ in steel, top style, base and legs:
| Model | Steel | Top | Base and legs | List price |
|---|---|---|---|---|
| VTT-7230 | 18 ga T-430 | Flat Top | Undershelf, galvanized legs | $568 |
| VTTR-7230 | 18 ga T-430 | 1-1/2" Riser | Undershelf, galvanized legs | $568 |
| VTTOB-7230 | 18 ga T-430 | Flat Top | Open base, galvanized legs | $628 |
| VTTROB-7230 | 18 ga T-430 | 1-1/2" Riser | Open base, galvanized legs | $628 |
| VTTR5-7230 | 18 ga T-430 | 5" Backsplash | Undershelf, galvanized legs | $760 |
| VTTR5OB-7230 | 18 ga T-430 | 5" Backsplash | Open base, galvanized legs | $836 |
| SVT-7230 | 18 ga T-430 | Flat Top | Undershelf, stainless legs | $1,002 |
| SVTR-7230 | 18 ga T-430 | 1-1/2" Riser | Undershelf, stainless legs | $1,002 |
| SVTOB-7230 | 18 ga T-430 | Flat Top | Open base, stainless legs | $1,104 |
| SVTROB-7230 | 18 ga T-430 | 1-1/2" Riser | Open base, stainless legs | $1,104 |
| SVTR5-7230 | 18 ga T-430 | 5" Backsplash | Undershelf, stainless legs | $1,166 |
| SVTR5OB-7230 | 18 ga T-430 | 5" Backsplash | Open base, stainless legs | $1,284 |
| CVT-7230 | 16 ga T-304 | Flat Top | Undershelf, stainless legs | $1,968 |
| CVTR5-7230 | 16 ga T-304 | 5" Backsplash | Undershelf, stainless legs | $2,163 |
| CVTOB-7230 | 16 ga T-304 | Flat Top | Open base, stainless legs | $2,261 |
| CVTR5OB-7230 | 16 ga T-304 | 5" Backsplash | Open base, stainless legs | $2,434 |
Other Lengths at 30" Deep
The same CVTR5OB construction in other lengths:
| Model | Size (L x W) | Legs | List price |
|---|---|---|---|
| CVTR5OB-3630 | 36" x 30" | 4 | $1,453 |
| CVTR5OB-4830 | 48" x 30" | 4 | $1,822 |
| CVTR5OB-6030 | 60" x 30" | 4 | $2,157 |
| CVTR5OB-7230 | 72" x 30" | 4 | $2,434 |
| CVTR5OB-8430 | 84" x 30" | 6 | $2,810 |
| CVTR5OB-9630 | 96" x 30" | 6 | $3,063 |
Same length, different depth: 72" x 24" (CVTR5OB-7224).
Add-Ons
- Drawers: BK drawer assemblies mount under the top of 30" deep tables: BKDWR-2020-ASSY-SS ($767), BKDWR-2015-ASSY-SS ($681), BKDWR-2020-ASSY-L-SS ($857).
- Casters: swap the feet for casters so the table rolls out for cleaning. Use locking casters on a table you work on.
- Overshelves and pot racks: BK lists single and double overshelves and a table-mount pot rack as options for its work tables.
Where It Fits
- Wall-side prep where splashes would hit the wall.
- Wet prep: produce, thawing, marinating.
- Dish and receiving areas along a wall.
- Spots where carts, ingredient bins or a trash can roll in underneath.
Assembly
The open base ships knocked down. Assemble the table near where it will stand, set the then level it with the feet. BK's assembly instructions are linked below.
Before You Order
- Measure the space: 72" long and 30" deep.
- Check the aisle space left behind the table.
- Check you have more than 39-3/4" of clearance under anything mounted above.
- Confirm you need T-304; for dry prep, a T-430 table costs less.
- Measure the cart, bin or equipment that will go underneath.
Documents
Frequently Asked Questions
What size is the BK Resources CVTR5OB-7230?
72" long and 30" deep, with a 34-3/4" work surface height. It is 39-3/4" tall at the back.
What is it made of?
The top is 16 gauge T-304 stainless steel. The legs are stainless steel, with matching side and rear bracing.
How many legs does it have?
Four. BK only adds a third pair on tables 7 feet and longer.
Does it have an undershelf?
No. It has an open base with side and rear bracing so you can roll carts or bins underneath.
Does it come assembled?
No. It ships for assembly on site.
What is the difference between the CVTR5OB-7230 and the CVTOB-7230?
The top. The CVTR5OB-7230 has a 5" backsplash; the CVTOB-7230 has a flat top. The size, steel and base are the same.