Skip to content

BK Resources CVTR5OB-3624 Stainless Steel Work Table 36" x 24", 16 Ga T-304, 5" Backsplash, Open Base, Stainless Legs

Original price $1,514.00 - Original price $1,514.00
Original price
$1,514.00
$1,514.00 - $1,514.00
Current price $1,514.00

The BK Resources CVTR5OB-3624 is a 36" long, 24" deep stainless steel work table with a 16 gauge T-304 stainless steel top with a 5" backsplash, an open base with stainless steel side and rear bracing and 4 stainless steel legs. The work surface is 34-3/4" high, and the backsplash brings the overall height to 39-3/4". BK Resources list price is $1,514.

Key Specs at a Glance

Model CVTR5OB-3624
Size 36" L x 24" W, 34-3/4" work surface height, 39-3/4" overall
Top 16 gauge T-304 stainless steel, 5" backsplash
Reinforcement Two 2" rectangular steel tubes welded under the top
Base Open base, stainless steel side and rear bracing
Legs 4 legs, 1-5/8" diameter, stainless steel
Feet Stainless steel bullet feet
Capacity 1,200 lb, evenly distributed (BK spec sheet)
Shipping Ships knocked down (KD) for assembly on site
List price $1,514

The 36 x 24 Size

The top measures 36" x 24", which gives you 864 square inches of work surface, about 6.0 square feet. That is enough for one cook to set up a full station with a cutting board, a few hotel pans and room to plate or portion.

At 24" deep, it gives room for a cutting board with containers behind it while still fitting a standard aisle. Measure the space before you order: you need 36" of clear length and the table comes 24" out from the wall. Check how much aisle space is left behind anyone standing at it.

The 5" Backsplash

A 5" backsplash runs along the back edge of the top. The backsplash is tall enough to protect the wall from splashes and to give pans and containers a back stop. It is made for a table that stands against a wall.

Same size, same base, different top: CVTOB-3624 (flat top, $1,159).

Check the height above the table. With the backsplash, it stands 39-3/4" tall at the back, so you need more than that under a wall shelf, window or pass-through.

16 Gauge T-304 Stainless Steel

16 gauge is thicker than 18 gauge. The lower the gauge number, the thicker the steel, so a 16 gauge top dents less and handles heavier equipment and pounding. T-304 is an austenitic stainless steel with nickel in it. It holds up better than T-430 against moisture, salt, acidic foods and harsh cleaners, so it suits wet areas, seafood and produce prep, and kitchens that wash down often.

Under the top, BK welds two 2" rectangular steel tubes to keep the work surface level under load and cut down the ringing of pans set down on bare steel.

The Open Base

Instead of an undershelf, the legs are tied together with stainless steel bracing on the sides and back. That leaves the space under the table open from the front, so you can roll in carts, bins on dollies, mobile ingredient bins or a trash can, or fit undercounter equipment.

The open base and back-edge riser make this a common choice in front of a wall where a cart or bins slide in underneath.

Prefer an undershelf? The CVTR5-3624 is the same size and top for $1,297.

Legs, Feet and Leveling

The CVTR5OB-3624 stands on 4 stainless steel legs, 1-5/8" in diameter. The feet are stainless steel bullet feet. Use them to level the table on a sloped or uneven floor so it does not rock, and so the back sits evenly against the wall.

If the table needs to move for cleaning, BK makes casters for its 1-5/8" tube legs. Check the stem type on the caster against your leg before you order.

Load Rating

BK rates this open base series at 1,200 lb, evenly distributed. Spread heavy equipment out and keep it near the legs.

Every BK 36 x 24 Work Table

BK makes this 36 x 24 size in 16 versions. They differ in steel, top style, base and legs:

Model Steel Top Base and legs List price
VTT-3624 18 ga T-430 Flat Top Undershelf, galvanized legs $373
VTTR-3624 18 ga T-430 1-1/2" Riser Undershelf, galvanized legs $373
VTTOB-3624 18 ga T-430 Flat Top Open base, galvanized legs $409
VTTROB-3624 18 ga T-430 1-1/2" Riser Open base, galvanized legs $409
VTTR5-3624 18 ga T-430 5" Backsplash Undershelf, galvanized legs $483
VTTR5OB-3624 18 ga T-430 5" Backsplash Open base, galvanized legs $530
SVT-3624 18 ga T-430 Flat Top Undershelf, stainless legs $641
SVTR-3624 18 ga T-430 1-1/2" Riser Undershelf, stainless legs $641
SVTOB-3624 18 ga T-430 Flat Top Open base, stainless legs $703
SVTROB-3624 18 ga T-430 1-1/2" Riser Open base, stainless legs $703
SVTR5-3624 18 ga T-430 5" Backsplash Undershelf, stainless legs $804
SVTR5OB-3624 18 ga T-430 5" Backsplash Open base, stainless legs $884
CVT-3624 16 ga T-304 Flat Top Undershelf, stainless legs $971
CVTOB-3624 16 ga T-304 Flat Top Open base, stainless legs $1,159
CVTR5-3624 16 ga T-304 5" Backsplash Undershelf, stainless legs $1,297
CVTR5OB-3624 16 ga T-304 5" Backsplash Open base, stainless legs $1,514

Other Lengths at 24" Deep

The same CVTR5OB construction in other lengths:

Model Size (L x W) Legs List price
CVTR5OB-2424 24" x 24" 4 $1,357
CVTR5OB-3024 30" x 24" 4 $1,484
CVTR5OB-3624 36" x 24" 4 $1,514
CVTR5OB-4824 48" x 24" 4 $1,620
CVTR5OB-6024 60" x 24" 4 $1,956
CVTR5OB-7224 72" x 24" 4 $2,252
CVTR5OB-8424 84" x 24" 6 $2,405
CVTR5OB-9624 96" x 24" 6 $2,759

Same length, different depth: 36" x 30" (CVTR5OB-3630).

Add-Ons

  • Drawers: BK drawer assemblies mount under the top of 24" deep tables: BKDWR-2020-ASSY-SS ($767), BKDWR-2015-ASSY-SS ($681), BKDWR-2020-ASSY-L-SS ($857).
  • Casters: swap the feet for casters so the table rolls out for cleaning. Use locking casters on a table you work on.
  • Overshelves and pot racks: BK lists single and double overshelves and a table-mount pot rack as options for its work tables.

Where It Fits

  • Wall-side prep where splashes would hit the wall.
  • Wet prep: produce, thawing, marinating.
  • Dish and receiving areas along a wall.
  • Spots where carts, ingredient bins or a trash can roll in underneath.

Assembly

The open base ships knocked down. Assemble the table near where it will stand, set the then level it with the feet. BK's assembly instructions are linked below.

Before You Order

  • Measure the space: 36" long and 24" deep.
  • Check the aisle space left behind the table.
  • Check you have more than 39-3/4" of clearance under anything mounted above.
  • Confirm you need T-304; for dry prep, a T-430 table costs less.
  • Measure the cart, bin or equipment that will go underneath.

Documents

Frequently Asked Questions

What size is the BK Resources CVTR5OB-3624?

36" long and 24" deep, with a 34-3/4" work surface height. It is 39-3/4" tall at the back.

What is it made of?

The top is 16 gauge T-304 stainless steel. The legs are stainless steel, with matching side and rear bracing.

How many legs does it have?

Four. BK only adds a third pair on tables 7 feet and longer.

Does it have an undershelf?

No. It has an open base with side and rear bracing so you can roll carts or bins underneath.

Does it come assembled?

No. It ships for assembly on site.

What is the difference between the CVTR5OB-3624 and the CVTOB-3624?

The top. The CVTR5OB-3624 has a 5" backsplash; the CVTOB-3624 has a flat top. The size, steel and base are the same.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare