Skip to content

BK Resources CVTOB-7224 Stainless Steel Work Table 72" x 24", 16 Ga T-304, Flat Top, Open Base, Stainless Legs

Original price $1,866.00 - Original price $1,866.00
Original price
$1,866.00
$1,866.00 - $1,866.00
Current price $1,866.00

The BK Resources CVTOB-7224 is a 72" long, 24" deep stainless steel work table with a 16 gauge T-304 stainless steel flat top, an open base with stainless steel side and rear bracing and 4 stainless steel legs. The work surface is 34-3/4" high. BK Resources list price is $1,866.

Key Specs at a Glance

Model CVTOB-7224
Size 72" L x 24" W, 34-3/4" work surface height
Top 16 gauge T-304 stainless steel, flat top
Reinforcement Two 2" rectangular steel tubes welded under the top
Base Open base, stainless steel side and rear bracing
Legs 4 legs, 1-5/8" diameter, stainless steel
Feet Stainless steel bullet feet over an adjustable plastic core
Capacity 1,200 lb, evenly distributed (BK spec sheet)
Shipping Ships knocked down (KD) for assembly on site
List price $1,866

The 72 x 24 Size

The top measures 72" x 24", which gives you 1,728 square inches of work surface, about 12.0 square feet. That is room for two people to work side by side, or one long station with prep at one end and packing or plating at the other.

At 24" deep, it gives room for a cutting board with containers behind it while still fitting a standard aisle. Measure the space before you order: you need 72" of clear length and the table comes 24" out from the wall. Check how much aisle space is left behind anyone standing at it.

Flat Top or Riser?

The top is flat, so it can be worked from the front, back or either end. A flat top is the right choice for a table that stands away from the wall, an island, or a table that butts up against equipment on the same height.

Same size, same base, different top: CVTR5OB-7224 (5" backsplash, $2,252).

16 Gauge T-304 Stainless Steel

16 gauge is thicker than 18 gauge. The lower the gauge number, the thicker the steel, so a 16 gauge top dents less and handles heavier equipment and pounding. T-304 is an austenitic stainless steel with nickel in it. It holds up better than T-430 against moisture, salt, acidic foods and harsh cleaners, so it suits wet areas, seafood and produce prep, and kitchens that wash down often.

Under the top, BK welds two 2" rectangular steel tubes to keep the work surface level under load and cut down the ringing of pans set down on bare steel.

The Open Base

Instead of an undershelf, the legs are tied together with stainless steel bracing on the sides and back. That leaves the space under the table open from the front, so you can roll in carts, bins on dollies, mobile ingredient bins or a trash can, or fit undercounter equipment.

Prefer an undershelf? The CVT-7224 is the same size and top for $1,627.

Legs, Feet and Leveling

The CVTOB-7224 stands on 4 stainless steel legs, 1-5/8" in diameter. The feet are stainless steel bullet feet over an adjustable plastic core. Use them to level the table on a sloped or uneven floor so it does not rock, and so the back sits evenly against the wall.

If the table needs to move for cleaning, BK makes casters for its 1-5/8" tube legs. Check the stem type on the caster against your leg before you order.

Load Rating

BK rates this open base series at 1,200 lb, evenly distributed. Spread heavy equipment out and keep it near the legs.

Every BK 72 x 24 Work Table

BK makes this 72 x 24 size in 16 versions. They differ in steel, top style, base and legs:

Model Steel Top Base and legs List price
VTT-7224 18 ga T-430 Flat Top Undershelf, galvanized legs $543
VTTR-7224 18 ga T-430 1-1/2" Riser Undershelf, galvanized legs $543
VTTOB-7224 18 ga T-430 Flat Top Open base, galvanized legs $597
VTTROB-7224 18 ga T-430 1-1/2" Riser Open base, galvanized legs $597
VTTR5-7224 18 ga T-430 5" Backsplash Undershelf, galvanized legs $721
VTTR5OB-7224 18 ga T-430 5" Backsplash Open base, galvanized legs $792
SVT-7224 18 ga T-430 Flat Top Undershelf, stainless legs $844
SVTR-7224 18 ga T-430 1-1/2" Riser Undershelf, stainless legs $844
SVTOB-7224 18 ga T-430 Flat Top Open base, stainless legs $927
SVTROB-7224 18 ga T-430 1-1/2" Riser Open base, stainless legs $927
SVTR5-7224 18 ga T-430 5" Backsplash Undershelf, stainless legs $1,005
SVTR5OB-7224 18 ga T-430 5" Backsplash Open base, stainless legs $1,107
CVT-7224 16 ga T-304 Flat Top Undershelf, stainless legs $1,627
CVTOB-7224 16 ga T-304 Flat Top Open base, stainless legs $1,866
CVTR5-7224 16 ga T-304 5" Backsplash Undershelf, stainless legs $2,035
CVTR5OB-7224 16 ga T-304 5" Backsplash Open base, stainless legs $2,252

Other Lengths at 24" Deep

The same CVTOB construction in other lengths:

Model Size (L x W) Legs List price
CVTOB-2424 24" x 24" 4 $948
CVTOB-3024 30" x 24" 4 $1,077
CVTOB-3624 36" x 24" 4 $1,159
CVTOB-4824 48" x 24" 4 $1,388
CVTOB-6024 60" x 24" 4 $1,549
CVTOB-7224 72" x 24" 4 $1,866
CVTOB-8424 84" x 24" 6 $1,962
CVTOB-9624 96" x 24" 6 $2,031

Same length, different depth: 72" x 30" (CVTOB-7230), 72" x 36" (CVTOB-7236).

Add-Ons

  • Drawers: BK drawer assemblies mount under the top of 24" deep tables: BKDWR-2020-ASSY-SS ($767), BKDWR-2015-ASSY-SS ($681), BKDWR-2020-ASSY-L-SS ($857).
  • Casters: swap the feet for casters so the table rolls out for cleaning. Use locking casters on a table you work on.
  • Overshelves and pot racks: BK lists single and double overshelves and a table-mount pot rack as options for its work tables.

Where It Fits

  • Islands and tables worked from both sides.
  • Landing space next to cooking equipment of the same height.
  • Packing, labeling and receiving.
  • Spots where carts, ingredient bins or a trash can roll in underneath.

Assembly

The open base ships knocked down. Assemble the table near where it will stand, set the then level it with the feet. BK's assembly instructions are linked below.

Before You Order

  • Measure the space: 72" long and 24" deep.
  • Check the aisle space left behind the table.
  • Choose a riser or backsplash model instead if the table will stand against a wall.
  • Confirm you need T-304; for dry prep, a T-430 table costs less.
  • Measure the cart, bin or equipment that will go underneath.

Documents

Frequently Asked Questions

What size is the BK Resources CVTOB-7224?

72" long and 24" deep, with a 34-3/4" work surface height.

What is it made of?

The top is 16 gauge T-304 stainless steel. The legs are stainless steel, with matching side and rear bracing.

How many legs does it have?

Four. BK only adds a third pair on tables 7 feet and longer.

Does it have an undershelf?

No. It has an open base with side and rear bracing so you can roll carts or bins underneath.

Does it come assembled?

No. It ships for assembly on site.

What is the difference between the CVTOB-7224 and the CVTR5OB-7224?

The top. The CVTOB-7224 has a flat top; the CVTR5OB-7224 has a 5" backsplash. The size, steel and base are the same.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare