Skip to content

BK Resources CVTOB-6036 Stainless Steel Work Table 60" x 36", 16 Ga T-304, Flat Top, Open Base, Stainless Legs

Original price $2,243.00 - Original price $2,243.00
Original price
$2,243.00
$2,243.00 - $2,243.00
Current price $2,243.00

The BK Resources CVTOB-6036 is a 60" long, 36" deep stainless steel work table with a 16 gauge T-304 stainless steel flat top, an open base with stainless steel side and rear bracing and 4 stainless steel legs. The work surface is 34-3/4" high. BK Resources list price is $2,243.

Key Specs at a Glance

Model CVTOB-6036
Size 60" L x 36" W, 34-3/4" work surface height
Top 16 gauge T-304 stainless steel, flat top
Reinforcement Two 2" rectangular steel tubes welded under the top
Base Open base, stainless steel side and rear bracing
Legs 4 legs, 1-5/8" diameter, stainless steel
Feet 1 5/8" stainless steel legs with stainless steel bullet feet
Capacity 1,200 lb, evenly distributed (BK spec sheet)
Product weight 130 lb (BK spec sheet)
Shipping Ships knocked down (KD) for assembly on site
List price $2,243

The 60 x 36 Size

The top measures 60" x 36", which gives you 2,160 square inches of work surface, about 15.0 square feet. That is room for two people to work side by side, or one long station with prep at one end and packing or plating at the other.

At 36" deep, it is an extra-deep table for island work, large batches or tables worked from both sides. Measure the space before you order: you need 60" of clear length and the table comes 36" out from the wall. Check how much aisle space is left behind anyone standing at it.

Flat Top or Riser?

The top is flat, so it can be worked from the front, back or either end. A flat top is the right choice for a table that stands away from the wall, an island, or a table that butts up against equipment on the same height.

16 Gauge T-304 Stainless Steel

16 gauge is thicker than 18 gauge. The lower the gauge number, the thicker the steel, so a 16 gauge top dents less and handles heavier equipment and pounding. T-304 is an austenitic stainless steel with nickel in it. It holds up better than T-430 against moisture, salt, acidic foods and harsh cleaners, so it suits wet areas, seafood and produce prep, and kitchens that wash down often.

Under the top, BK welds two 2" rectangular steel tubes to keep the work surface level under load and cut down the ringing of pans set down on bare steel.

The Open Base

Instead of an undershelf, the legs are tied together with stainless steel bracing on the sides and back. That leaves the space under the table open from the front, so you can roll in carts, bins on dollies, mobile ingredient bins or a trash can, or fit undercounter equipment.

Prefer an undershelf? The CVT-6036 is the same size and top for $2,181.

Legs, Feet and Leveling

The CVTOB-6036 stands on 4 stainless steel legs, 1-5/8" in diameter. The feet are 1 5/8" stainless steel legs with stainless steel bullet feet. Use them to level the table on a sloped or uneven floor so it does not rock, and so the back sits evenly against the wall.

If the table needs to move for cleaning, BK makes casters for its 1-5/8" tube legs. Check the stem type on the caster against your leg before you order.

Load Rating

BK rates this open base series at 1,200 lb, evenly distributed. Spread heavy equipment out and keep it near the legs.

Every BK 60 x 36 Work Table

BK makes this 60 x 36 size in 2 versions. They differ in steel, top style, base and legs:

Model Steel Top Base and legs List price
CVT-6036 16 ga T-304 Flat Top Undershelf, stainless legs $2,181
CVTOB-6036 16 ga T-304 Flat Top Open base, stainless legs $2,243

Other Lengths at 36" Deep

The same CVTOB construction in other lengths:

Model Size (L x W) Legs List price
CVTOB-3636 36" x 36" 4 $1,728
CVTOB-4836 48" x 36" 4 $1,979
CVTOB-6036 60" x 36" 4 $2,243
CVTOB-7236 72" x 36" 4 $2,787
CVTOB-9636 96" x 36" 6 $3,481

Same length, different depth: 60" x 24" (CVTOB-6024), 60" x 30" (CVTOB-6030).

Add-Ons

  • Drawers: BK drawer assemblies mount under the top of 36" deep tables: BKDWR-2020-ASSY-SS ($767), BKDWR-2015-ASSY-SS ($681), BKDWR-2020-ASSY-L-SS ($857).
  • Casters: swap the feet for casters so the table rolls out for cleaning. Use locking casters on a table you work on.
  • Overshelves and pot racks: BK lists single and double overshelves and a table-mount pot rack as options for its work tables.

Where It Fits

  • Islands and tables worked from both sides.
  • Landing space next to cooking equipment of the same height.
  • Packing, labeling and receiving.
  • Spots where carts, ingredient bins or a trash can roll in underneath.

Assembly

The open base ships knocked down. Assemble the table near where it will stand, set the then level it with the feet. BK's assembly instructions are linked below.

Before You Order

  • Measure the space: 60" long and 36" deep.
  • Check the aisle space left behind the table.
  • Choose a riser or backsplash model instead if the table will stand against a wall.
  • Confirm you need T-304; for dry prep, a T-430 table costs less.
  • Measure the cart, bin or equipment that will go underneath.

Documents

Frequently Asked Questions

What size is the BK Resources CVTOB-6036?

60" long and 36" deep, with a 34-3/4" work surface height.

What is it made of?

The top is 16 gauge T-304 stainless steel. The legs are stainless steel, with matching side and rear bracing.

How many legs does it have?

Four. BK only adds a third pair on tables 7 feet and longer.

Does it have an undershelf?

No. It has an open base with side and rear bracing so you can roll carts or bins underneath.

Does it come assembled?

No. It ships for assembly on site.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare