Skip to content

BK Resources CVT-3030 Stainless Steel Work Table 30" x 30", 16 Ga T-304, Flat Top, Undershelf, Stainless Legs

Original price $1,017.00 - Original price $1,017.00
Original price
$1,017.00
$1,017.00 - $1,017.00
Current price $1,017.00

The BK Resources CVT-3030 is a 30" long, 30" deep stainless steel work table with a 16 gauge T-304 stainless steel flat top, an adjustable stainless steel undershelf and 4 stainless steel legs. The work surface is 34-3/4" high. BK Resources list price is $1,017.

Key Specs at a Glance

Model CVT-3030
Size 30" L x 30" W, 34-3/4" work surface height
Top 16 gauge T-304 stainless steel, flat top
Reinforcement Two 2" rectangular steel tubes welded under the top
Base Adjustable undershelf, stainless steel
Legs 4 legs, 1-5/8" diameter, stainless steel
Feet 1 1/4" adjustable high impact corrosion resistant feet
Capacity 900 lb top, 400 lb undershelf, 900 lb total, evenly distributed (BK spec sheet)
Product weight 55 lb (BK spec sheet)
List price $1,017

The 30 x 30 Size

The top measures 30" x 30", which gives you 900 square inches of work surface, about 6.2 square feet. That is a compact footprint for a single task: a scale, a slicer station, a landing spot next to a range or a small bar back.

At 30" deep, it is the deepest standard size in most BK lines. It holds a full sheet pan front to back with room to spare, which suits baking, staging and larger prep. Measure the space before you order: you need 30" of clear length and the table comes 30" out from the wall. Check how much aisle space is left behind anyone standing at it.

Flat Top or Riser?

The top is flat, so it can be worked from the front, back or either end. A flat top is the right choice for a table that stands away from the wall, an island, or a table that butts up against equipment on the same height.

Same size, same base, different top: CVTR5-3030 (5" backsplash, $1,344).

16 Gauge T-304 Stainless Steel

16 gauge is thicker than 18 gauge. The lower the gauge number, the thicker the steel, so a 16 gauge top dents less and handles heavier equipment and pounding. T-304 is an austenitic stainless steel with nickel in it. It holds up better than T-430 against moisture, salt, acidic foods and harsh cleaners, so it suits wet areas, seafood and produce prep, and kitchens that wash down often.

Under the top, BK welds two 2" rectangular steel tubes to keep the work surface level under load and cut down the ringing of pans set down on bare steel.

The Undershelf

The undershelf is stainless steel and adjusts up and down the legs. Use it for bins, stock pots, sheet pans and boxed product. Set it lower for tall items, or higher to keep things closer to hand. A stainless shelf stands up better to moisture and cleaning chemicals than galvanized steel, so it suits dish areas and wash-down kitchens.

Need a replacement or a second shelf? The matching undershelf for this size is the SVTS-3030 ($225).

Prefer an open base? The CVTOB-3030 is the same size and top for $996.

Legs, Feet and Leveling

The CVT-3030 stands on 4 stainless steel legs, 1-5/8" in diameter. The feet are 1 1/4" adjustable high impact corrosion resistant feet. Use them to level the table on a sloped or uneven floor so it does not rock, and so the back sits evenly against the wall.

If the table needs to move for cleaning, BK makes casters for its 1-5/8" tube legs. Check the stem type on the caster against your leg before you order.

Load Rating

BK rates the CVT-3030 at 900 lb on the top and 400 lb on the undershelf, 900 lb in total. Those ratings assume the weight is spread evenly. Put the heaviest items near the legs.

Every BK 30 x 30 Work Table

BK makes this 30 x 30 size in 15 versions. They differ in steel, top style, base and legs:

Model Steel Top Base and legs List price
VTT-3030 18 ga T-430 Flat Top Undershelf, galvanized legs $363
VTTR-3030 18 ga T-430 1-1/2" Riser Undershelf, galvanized legs $363
VTTOB-3030 18 ga T-430 Flat Top Open base, galvanized legs $399
VTTROB-3030 18 ga T-430 1-1/2" Riser Open base, galvanized legs $399
VTTR5-3030 18 ga T-430 5" Backsplash Undershelf, galvanized legs $459
VTTR5OB-3030 18 ga T-430 5" Backsplash Open base, galvanized legs $504
SVT-3030 18 ga T-430 Flat Top Undershelf, stainless legs $624
SVTR-3030 18 ga T-430 1-1/2" Riser Undershelf, stainless legs $624
SVTOB-3030 18 ga T-430 Flat Top Open base, stainless legs $688
SVTROB-3030 18 ga T-430 1-1/2" Riser Open base, stainless legs $688
SVTR5-3030 18 ga T-430 5" Backsplash Undershelf, stainless legs $784
SVTR5OB-3030 18 ga T-430 5" Backsplash Open base, stainless legs $865
CVTOB-3030 16 ga T-304 Flat Top Open base, stainless legs $996
CVT-3030 16 ga T-304 Flat Top Undershelf, stainless legs $1,017
CVTR5-3030 16 ga T-304 5" Backsplash Undershelf, stainless legs $1,344

Other Lengths at 30" Deep

The same CVT construction in other lengths:

Model Size (L x W) Legs List price
CVT-3030 30" x 30" 4 $1,017
CVT-3630 36" x 30" 4 $1,111
CVT-4830 48" x 30" 4 $1,180
CVT-6030 60" x 30" 4 $1,692
CVT-7230 72" x 30" 4 $1,968
CVT-8430 84" x 30" 6 $2,462
CVT-9630 96" x 30" 6 $2,594

Same length, different depth: 30" x 24" (CVT-3024).

Add-Ons

  • Drawers: BK drawer assemblies mount under the top of 30" deep tables: BKDWR-2020-ASSY-SS ($767), BKDWR-2015-ASSY-SS ($681), BKDWR-2020-ASSY-L-SS ($857).
  • Casters: swap the feet for casters so the table rolls out for cleaning. Use locking casters on a table you work on.
  • Overshelves and pot racks: BK lists single and double overshelves and a table-mount pot rack as options for its work tables.

Where It Fits

  • Islands and tables worked from both sides.
  • Landing space next to cooking equipment of the same height.
  • Packing, labeling and receiving.
  • Stations that need storage for bins, pots and boxed product underneath.

Assembly

Assemble the table near where it will stand, set the undershelf height, then level it with the feet. BK's assembly instructions are linked below.

Before You Order

  • Measure the space: 30" long and 30" deep.
  • Check the aisle space left behind the table.
  • Choose a riser or backsplash model instead if the table will stand against a wall.
  • Confirm you need T-304; for dry prep, a T-430 table costs less.
  • Check what goes underneath against the shelf space between the legs.

Documents

Frequently Asked Questions

What size is the BK Resources CVT-3030?

30" long and 30" deep, with a 34-3/4" work surface height.

What is it made of?

The top is 16 gauge T-304 stainless steel. The legs are stainless steel, and so is the undershelf.

How much weight does it hold?

BK lists 900 lb in total, evenly distributed, with 900 lb on the top and 400 lb on the undershelf.

How many legs does it have?

Four. BK only adds a third pair on tables 7 feet and longer.

Is the undershelf adjustable?

Yes. It adjusts in height on the legs.

Does it come assembled?

No. It ships for assembly on site.

What is the difference between the CVT-3030 and the CVTR5-3030?

The top. The CVT-3030 has a flat top; the CVTR5-3030 has a 5" backsplash. The size, steel and base are the same.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare