BK Resources BKPT-2-3096S-L 2 Compartment Prep Table with Hand Sink 96" x 30", Left Drainboard, 16 Ga T-304
The BK Resources BKPT-2-3096S-L is a 96" x 30" 16 gauge T-304 stainless steel prep table with two 16" x 20" x 10" deep sink compartments and a separate 10" x 14" x 10" deep hand sink, with the drainboard on the left. It has 8" on-center deck mount faucet holes and a stainless steel top, base and legs. BK lists a 3 to 10 day lead time. BK Resources list price is $4,952.
Key Specs at a Glance
| Model | BKPT-2-3096S-L |
| Size | 96" L x 30" W, 41-3/4" overall height |
| Steel | 16 gauge T-304 stainless steel (BK spec sheet and hub) |
| Sink bowls | Two 16" x 20" x 10" deep |
| Hand sink | 10" x 14" x 10" deep |
| Drainboard | Left |
| Faucet holes | 8" on center, deck mount; faucets not included |
| Base | Stainless steel legs and undershelf |
| Lead time | 3-10 days (BK) |
| List price | $4,952 |
Prep, Wash and Hand Sink in One Table
This table combines a two-compartment prep sink, a work surface and a dedicated hand sink in one footprint. Use the two bowls for washing and rinsing produce or thawing under running water, the drainboard for trimming and staging, and the hand sink so staff can wash hands without leaving the station. Check your local health code for hand sink requirements and placement.
16 Gauge T-304 Stainless Steel
16 gauge is heavier than the 18 gauge used on general work tables, and T-304 stainless steel resists corrosion from water, salt and acidic foods. Both matter on a table that is wet all day.
Compare the BKPT Models
| Model | Length | Drainboard | List price |
|---|---|---|---|
| BKPT-2-3084S-L | 84" | Left | $4,480 |
| BKPT-2-3084S-R | 84" | Right | $4,480 |
| BKPT-2-3096S-L | 96" | Left | $4,952 |
| BKPT-2-3096S-R | 96" | Right | $4,952 |
Installing a Sink Table
Set the table in place and level it with the feet before the plumber connects anything, so the bowl drains fully and the top sits even. Most jurisdictions require a licensed plumber for the water supply and the drain, and many require an indirect drain or air gap for food prep sinks. Ask your plumber and health inspector what applies to your kitchen before you order.
Where It Fits
- Produce washing and trimming.
- Thawing under running water.
- Seafood, poultry and meat prep that needs a sink close by.
- Bars, cafes and commissaries that need a wet prep station in a small footprint.
Sink Table or Work Table Plus a Separate Sink?
A sink table puts the bowl and the work surface in one footprint, so washed product goes straight onto the prep area and liquids drain back into the bowl. A separate sink and work table gives more flexibility in layout, but takes more floor space and leaves a seam where water can get between them. For tight kitchens and wet prep, a one-piece sink table is usually the cleaner choice.
Cleaning and Care
- Wipe stainless steel with warm water and a mild detergent, then rinse and dry. Wipe in the direction of the grain.
- Avoid steel wool, wire brushes and chlorine bleach; they scratch the surface or cause pitting and rust spots.
- Dry galvanized parts after wet cleaning so the zinc coating lasts longer.
- Check the feet and fasteners now and then and re-level the table if it starts to rock.
Before You Order
- Measure the space: 96" long and 30" deep.
- Choose the drainboard side to match your workflow and plumbing.
- Order faucets with 8" centers for the bowls and a faucet for the hand sink.
- Plan for a plumber to connect water and drains to code.
- Allow for BK's 3-10 day lead time.
Documents
Frequently Asked Questions
How many sinks does it have?
Three: two 16" x 20" x 10" deep compartments and a 10" x 14" x 10" deep hand sink.
What steel is it?
16 gauge T-304 stainless steel.
Are faucets included?
No. The deck has 8" on-center faucet holes.
What is the lead time?
BK lists 3 to 10 days.