Skip to content

BK Resources 5SS-2RA-GR-TLB 5" Gray Rubber 1-1/4" Expanding Stem Caster, Top Lock Brake, Stainless Steel

Original price $102.00 - Original price $102.00
Original price
$102.00
$102.00 - $102.00
Current price $102.00

The BK Resources 5SS-2RA-GR-TLB is a 5" gray rubber expanding stem caster that fits 1-1/4" OD tube legs. It is rated at 250 lb by BK, and it has a top lock brake. The rig is stainless steel. BK Resources list price is $102.

Key Specs at a Glance

Model 5SS-2RA-GR-TLB
Quantity Single caster
Wheel diameter 5"
Tread Gray rubber
Mount Expanding stem, fits 1-1/4" OD tubing
Brake Top lock brake
Capacity 250 lb per caster (BK)
Temperature range -45° to 180°F
Rig Stainless steel
List price $102

What BK Lists

  • Expanding Stem Caster
  • 5" Diameter Wheel
  • Top Lock Brake
  • Fits 1-1/4" OD Tubing
  • Non-Marking Gray Rubber Tread
  • 250 Lb. Capacity
  • Resistant To Oil, Grease, Water, and most Solvents
  • Double Ball Bearing
  • Operational Temp Range -45° To 180° F
  • Stainless Steel

Will It Fit?

An expanding stem slides into the open end of a hollow tube leg. Turning the bolt expands a rubber grip inside the tube so the caster locks in place. This one is made for tubing with a 1-1/4" outside diameter. Measure across the outside of the leg before you order; a stem for the wrong size will not hold.

BK Resources work tables use 1-5/8" legs, so this 1-1/4" stem is for other equipment, carts and racks with 1-1/4" tubing.

The Gray Rubber Wheel

Gray rubber is a non-marking, cushioned tread. BK rates it as resistant to oil, grease, water and most solvents. The softer tread absorbs bumps and is gentle on floors.

Brake or No Brake?

A top lock brake is a lever on top of the caster that presses against the wheel to stop it rolling. Use locking casters on anything people work on, such as a prep table, so it stays put. A common setup is two locking and two non-locking casters, or four locking casters on a work surface.

Compare Options in This Size

Model Tread Brake Qty Capacity List price
5SS-2RA-GR Gray Rubber None 1 250 lb $97
5SS-2RA-GR-TLB Gray Rubber Top lock brake 1 250 lb $102
5SS-2RA-HR Hard Rubber None 1 300 lb $93
5SS-2RA-HR-TLB Hard Rubber Top lock brake 1 300 lb $97
5SS-2RA-LDP Polyolefin None 1 300 lb $92
5SS-2RA-LDP-TLB Polyolefin Top lock brake 1 300 lb $96
5SS-2RA-PLY Polyurethane None 1 300 lb $94
5SS-2RA-PLY-TLB Polyurethane Top lock brake 1 300 lb $99

Height and Load

Casters add height. When you swap feet for casters on a work table, the work surface rises by the caster height, so check that it still sits comfortably for the people using it and still fits under anything mounted above. BK's spec sheet lists the overall height of each caster.

BK rates each caster at 250 lb. Add up the weight of the equipment plus everything that goes on it, and divide by the number of casters. Leave a margin for uneven floors, where one caster can briefly carry more than its share.

Installing Expanding Stem Casters

  1. Lift and support the table; never work under an unsupported table.
  2. Remove the feet from the legs.
  3. Push the stem into the leg until the caster seats against the end of the tube.
  4. Tighten the stem so the grip expands inside the tube and the caster cannot pull out.
  5. Lower the table and lock the brakes before loading it.

Before You Order

  • Measure the outside diameter of the leg: this caster fits 1-1/4" tubing.
  • Count how many you need; this listing is a single caster.
  • Plan which casters need brakes.
  • Check the total load against 250 lb per caster.

Documents

Frequently Asked Questions

What size tube does it fit?

1-1/4" outside diameter tubing.

How much weight does it hold?

BK rates each caster at 250 lb.

Does it have a brake?

Top lock brake.

Is it a single caster or a set?

A single caster.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare