BK Resources 5SBR-1PT-LDP-TLB 5" Polyolefin Plate Caster, Top Lock Brake
The BK Resources 5SBR-1PT-LDP-TLB is a 5" polyolefin plate caster with a 2-3/8" x 3-5/8" mounting plate. It is rated at 300 lb by BK, and it has a top lock brake. The rig is zinc-plated steel. BK Resources list price is $26.
Key Specs at a Glance
| Model | 5SBR-1PT-LDP-TLB |
| Quantity | Single caster |
| Wheel diameter | 5" |
| Tread | Polyolefin |
| Mount | Plate |
| Top plate | 2-3/8" x 3-5/8" |
| Bolt hole pattern | 1-3/4" x 3" |
| King pin | 1/2" |
| Brake | Top lock brake |
| Capacity | 300 lb per caster (BK) |
| Temperature range | -45° to 180°F |
| Rig | Zinc-plated steel |
| List price | $26 |
What BK Lists
- Polyolefin Wheel
- Polyolefin Wheel Resistant to Chemicals & Solvents
- Temperature Range -45° to 180°F
- Nylon Bearing Sleeve
- Double Ball Bearing Raceway for Long Wear and Added Strength
- Zinc Plated
- 1/2" King Pin
- 300 LBS Capacity
- Top Lock Brake
Will It Fit?
A plate caster bolts to a flat mounting surface on the underside of the equipment. Measure the bolt holes on the equipment or on the old caster and match them to the plate (1-3/4" x 3" bolt pattern). Universal plates have slotted holes that fit several bolt patterns.
The Polyolefin Wheel
Polyolefin is a hard, non-marking tread that BK rates as resistant to chemicals and solvents. Hard treads roll easily under load on smooth floors.
Brake or No Brake?
A top lock brake is a lever on top of the caster that presses against the wheel to stop it rolling. Use locking casters on anything people work on, such as a prep table, so it stays put. A common setup is two locking and two non-locking casters, or four locking casters on a work surface.
Compare Options in This Size
| Model | Tread | Brake | Qty | Capacity | List price |
|---|---|---|---|---|---|
| 5SBR-1PT-GR | Gray Rubber | None | 1 | 250 lb | $28 |
| 5SBR-1PT-GR-TLB | Gray Rubber | Top lock brake | 1 | 250 lb | $30 |
| 5SBR-1PT-GR-TTB | Gray Rubber | Total lock brake | 1 | 250 lb | $31 |
| 5SBR-1PT-GR-PS4 | Gray Rubber | None | 4 | 250 lb | $120 |
| 5SBR-1PT-HR | Hard Rubber | None | 1 | 300 lb | $26 |
| 5SBR-1PT-HR-TLB | Hard Rubber | Top lock brake | 1 | 300 lb | $28 |
| 5SBR-1PT-HR-TTB | Hard Rubber | Total lock brake | 1 | 300 lb | $30 |
| 5SBR-1PT-LDP | Polyolefin | None | 1 | 300 lb | $24 |
| 5SBR-1PT-LDP-TLB | Polyolefin | Top lock brake | 1 | 300 lb | $26 |
| 5SBR-1PT-LDP-TTB | Polyolefin | Total lock brake | 1 | 300 lb | $30 |
| 5SBR-1PT-LDP-PS4 | Polyolefin | Top lock brake | 4 | 300 lb | $101 |
| 5SBR-1PT-PLY | Polyurethane | None | 1 | 300 lb | $26 |
| 5SBR-1PT-PLY-TLB | Polyurethane | Top lock brake | 1 | 300 lb | $28 |
| 5SBR-1PT-PLY-TTB | Polyurethane | Total lock brake | 1 | 300 lb | $30 |
| 5SBR-1PT-PLY-PS4 | Polyurethane | Top lock brake | 4 | 300 lb | $118 |
Same caster in other wheel sizes: 3" (3SBR-1PT-LDP-TLB), 4" (4SBR-1PT-LDP-TLB). A larger wheel rolls more easily over floor drains, grout lines and thresholds; a smaller wheel keeps the equipment lower.
Height and Load
Casters add height. When you swap feet for casters on a work table, the work surface rises by the caster height, so check that it still sits comfortably for the people using it and still fits under anything mounted above. BK's spec sheet lists the overall height of each caster.
BK rates each caster at 300 lb. Add up the weight of the equipment plus everything that goes on it, and divide by the number of casters. Leave a margin for uneven floors, where one caster can briefly carry more than its share.
Before You Order
- Measure the bolt pattern on the equipment.
- Count how many you need; this listing is a single caster.
- Plan which casters need brakes.
- Check the total load against 300 lb per caster.
Documents
Frequently Asked Questions
How much weight does it hold?
BK rates each caster at 300 lb.
Does it have a brake?
Top lock brake.
Is it a single caster or a set?
A single caster.