BK Resources 4SBR-RA-PLY 4" Polyurethane 1-5/8" Expanding Stem Caster, No Brake
The BK Resources 4SBR-RA-PLY is a 4" polyurethane expanding stem caster that fits 1-5/8" OD tube legs. It is rated at 300 lb by BK, with no brake. The rig is zinc-plated steel. BK Resources list price is $25.
Key Specs at a Glance
| Model | 4SBR-RA-PLY |
| Quantity | Single caster |
| Wheel diameter | 4" |
| Tread | Polyurethane |
| Mount | Expanding stem, fits 1-5/8" OD tubing |
| Brake | None |
| Capacity | 300 lb per caster (BK) |
| Temperature range | -45° to 180°F |
| Rig | Zinc-plated steel |
| List price | $25 |
What BK Lists
- Caster
- 4" Diameter Expanding Stem
- Fits 1-5/8" OD Tubing
- Without Brake
- Non-Marking Polyurethane Tread
- 300 Lb. Capacity
- Resistant To Acids And Caustics
- Double Ball Bearing
- Operational Temp Range -45° To 180° F
- Zinc Plated
Will It Fit?
An expanding stem slides into the open end of a hollow tube leg. Turning the bolt expands a rubber grip inside the tube so the caster locks in place. This one is made for tubing with a 1-5/8" outside diameter. Measure across the outside of the leg before you order; a stem for the wrong size will not hold.
BK Resources work tables stand on 1-5/8" tube legs, so this is the size for BK tables such as the VTT-4830, SVT-4830 and CVT-4830. Check that the bottom of the leg is open; remove the bullet foot first.
The Polyurethane Wheel
Polyurethane is a non-marking tread that BK rates as resistant to acids and caustics. It rolls smoothly and quietly and suits most kitchen floors, including tile and sealed concrete.
Brake or No Brake?
This caster has no brake. Pair it with braked casters on the same piece of equipment; the braked version keeps a table or rack from rolling while it is in use.
Compare Options in This Size
| Model | Tread | Brake | Qty | Capacity | List price |
|---|---|---|---|---|---|
| 4SBR-RA-GR | Gray Rubber | None | 1 | 250 lb | $25 |
| 4SBR-RA-GR-TLB | Gray Rubber | Top lock brake | 1 | 250 lb | $27 |
| 4SBR-RA-GR-TTB | Gray Rubber | Total lock brake | 1 | 250 lb | $32 |
| 4SBR-RA-GR-PS4 | Gray Rubber | Top lock brake | 4 | 250 lb | $106 |
| 4SBR-RA-HR | Hard Rubber | None | 1 | 300 lb | $25 |
| 4SBR-RA-HR-TLB | Hard Rubber | Top lock brake | 1 | 300 lb | $26 |
| 4SBR-RA-HR-TTB | Hard Rubber | Total lock brake | 1 | 300 lb | $31 |
| 4SBR-RA-HR-PS4 | Hard Rubber | Top lock brake | 4 | 300 lb | $102 |
| 4SBR-RA-LDP | Polyolefin | None | 1 | 300 lb | $22 |
| 4SBR-RA-LDP-TLB | Polyolefin | Top lock brake | 1 | 300 lb | $24 |
| 4SBR-RA-LDP-TTB | Polyolefin | Total lock brake | 1 | 300 lb | $29 |
| 4SBR-RA-LDP-PS4 | Polyolefin | Top lock brake | 4 | 300 lb | $93 |
| 4SBR-RA-PLY | Polyurethane | None | 1 | 300 lb | $25 |
| 4SBR-RA-PLY-TLB | Polyurethane | Top lock brake | 1 | 300 lb | $27 |
| 4SBR-RA-PLY-TTB | Polyurethane | Total lock brake | 1 | 300 lb | $32 |
| 4SBR-RA-PLY-PS4 | Polyurethane | Top lock brake | 4 | 300 lb | $108 |
Same caster in other wheel sizes: 3" (3SBR-RA-PLY), 5" (5SBR-RA-PLY). A larger wheel rolls more easily over floor drains, grout lines and thresholds; a smaller wheel keeps the equipment lower.
Height and Load
Casters add height. When you swap feet for casters on a work table, the work surface rises by the caster height, so check that it still sits comfortably for the people using it and still fits under anything mounted above. BK's spec sheet lists the overall height of each caster.
BK rates each caster at 300 lb. Add up the weight of the equipment plus everything that goes on it, and divide by the number of casters. Leave a margin for uneven floors, where one caster can briefly carry more than its share.
Installing Expanding Stem Casters
- Lift and support the table; never work under an unsupported table.
- Remove the feet from the legs.
- Push the stem into the leg until the caster seats against the end of the tube.
- Tighten the stem so the grip expands inside the tube and the caster cannot pull out.
- Lower the table and lock the brakes before loading it.
Before You Order
- Measure the outside diameter of the leg: this caster fits 1-5/8" tubing.
- Count how many you need; this listing is a single caster.
- Plan which casters need brakes.
- Check the total load against 300 lb per caster.
Documents
Frequently Asked Questions
What size tube does it fit?
1-5/8" outside diameter tubing.
How much weight does it hold?
BK rates each caster at 300 lb.
Does it have a brake?
No.
Is it a single caster or a set?
A single caster.
Does it fit BK Resources work tables?
Yes. BK work tables use 1-5/8" tube legs.