BK Resources 3SBR-15ST-LDP-PS4 3" Polyolefin 1/2" x 3/4" Threaded Stem Casters, Set of 4, Top Lock Brake
The BK Resources 3SBR-15ST-LDP-PS4 is a set of four 3" polyolefin threaded stem casters with a 1/2" x 3/4" threaded stem. Each caster is rated at 220 lb by BK, and they have a top lock brake. The rig is zinc-plated steel. BK Resources list price is $155 for the set.
Key Specs at a Glance
| Model | 3SBR-15ST-LDP-PS4 |
| Quantity | Set of 4 |
| Wheel diameter | 3" |
| Tread | Polyolefin |
| Mount | Threaded stem, 1/2" x 3/4" |
| Brake | Top lock brake |
| Capacity | 220 lb per caster (BK) |
| Temperature range | -45° to 180°F |
| Rig | Zinc-plated steel |
| Certification | NSF |
| List price | $155 (set of 4) |
What BK Lists
- Equipment Caster
- Contains A Set Of (4) 3SBR-15ST-LDP-TLB Threaded Stem Caster Kit In Pop Box
- (4) 3" Diameter
- 1/2" x 3/4" Threaded Stem
- Polyolefin Wheel With Brake
- 220 Lb Capacity
- Resistant To Oil And Grease
- Double Ball Bearing
- Operational Temp Range -45° To 180°F
- Zinc Plated
- NSF
Will It Fit?
A threaded stem screws into a threaded socket on the equipment. This caster has a 1/2" x 3/4" stem. Check the thread size and length on the equipment or the old caster before ordering; the thread must match exactly.
The Polyolefin Wheel
Polyolefin is a hard, non-marking tread that BK rates as resistant to chemicals and solvents. Hard treads roll easily under load on smooth floors.
Brake or No Brake?
A top lock brake is a lever on top of the caster that presses against the wheel to stop it rolling. Use locking casters on anything people work on, such as a prep table, so it stays put. A common setup is two locking and two non-locking casters, or four locking casters on a work surface.
Height and Load
Casters add height. When you swap feet for casters on a work table, the work surface rises by the caster height, so check that it still sits comfortably for the people using it and still fits under anything mounted above. BK's spec sheet lists the overall height of each caster.
BK rates each caster at 220 lb. Add up the weight of the equipment plus everything that goes on it, and divide by the number of casters. Leave a margin for uneven floors, where one caster can briefly carry more than its share.
Before You Order
- Match the thread: this stem is 1/2" x 3/4".
- Count how many you need: this is a set of 4.
- Plan which casters need brakes.
- Check the total load against 220 lb per caster.
Frequently Asked Questions
What is the stem thread?
1/2" x 3/4".
How much weight does it hold?
BK rates each caster at 220 lb.
Does it have a brake?
Top lock brake.
Is it a single caster or a set?
A set of 4.