Atosa Mixrite ST3072ECB4 Stainless Steel Work Table 30 x 72, 4" Backsplash, Undershelf, NSF

The Atosa Mixrite ST3072ECB4 is a 72" wide, 30" deep stainless steel work table with a 4" backsplash and an adjustable undershelf. The work surface is 34" high, and the backsplash brings the overall height to 38". It is built from 18 gauge, 430 stainless steel, and Atosa rates it at 500 lb on the top and 380 lb on the undershelf. It is NSF listed and ships knocked down.

Key Specs at a Glance

The 30 x 72 Size

At 72" x 30", the ST3072ECB4 is the longest 30" deep table with a 4" backsplash. It lines a 6' wall with full-depth work surface on 4 legs. Atosa rates it at 500 lb on the top and 380 lb on the undershelf.

The top gives you 2,160 square inches of work surface, about 15 square feet. Before you order, measure the space: you need 72" of width, and the table comes 30" out from the wall. Check how much aisle space is left behind anyone standing at the table.

Choosing the Depth

A 30" depth is the middle option. It leaves room for a cutting board at the front with containers or ingredients behind it, without the reach of a 36" table.

The 4" Backsplash

A 4" backsplash runs along the back of the top. It is made for a table that stands against a wall. Spills, crumbs and small items stop at the backsplash instead of falling into the gap behind the table, which is hard to reach and clean. It also gives you a back stop for containers and boards.

The top is polished to a satin finish and sound deadened, and the edges are turned down.

If the table will not stand against a wall, the flat top ST3072EC is the same 30 x 72 size, rated at 540 lb on the top.

Height and Clearance

The work surface is 34" high, and the overall height is 38" to the top of the backsplash. If the table goes under a wall shelf, window, pass-through or outlet, measure from the floor to the bottom of it. You need more than 38" for the table to fit.

The Undershelf

The undershelf is stainless steel and adjusts in height. Atosa lists it at 24" x 66", rated at 380 lb. Use it for bins, bowls, sheet pans and boxed product. Measure your tallest item before you set the height: a lower shelf gives more clearance, a higher shelf keeps items closer to hand.

Load Ratings

Atosa lists 500 lb on the top and 380 lb on the undershelf. Treat those as limits. Spread heavy items out and keep the heaviest near the legs.

Legs and Leveling

The ST3072ECB4 stands on 4 stainless steel tubular legs, 1-5/8" in diameter, with 1" adjustable bullet feet. Use the feet to level it on an uneven floor so it does not rock. Against a wall, level it so the back sits evenly along the wall.

Compare Nearby Sizes

Here is how the ST3072ECB4 compares with the other 30" deep tables with a 4" backsplash:

• Smaller: ST3060ECB4, 60" wide.
• Same width at 24" deep with a 4" backsplash: ST2472ECB4.

Assembly

The ST3072ECB4 ships knocked down (KD), and Atosa says it is easy to assemble. The shipping weight is 86 lb. Put it together near where it will stand, then level it with the feet.

Before You Order

• Measure the space: 72" wide and 30" deep.
• Check the aisle space left behind the table.
• Check that you have more than 38" of clearance under anything mounted above.
• Check what goes underneath against the 24" x 66" undershelf.

Frequently Asked Questions

What size is the Atosa ST3072ECB4?

72" wide and 30" deep, with a 34" work surface. It is 38" high to the top of the backsplash.

How much weight does it hold?

Atosa lists 500 lb on the top and 380 lb on the undershelf.

What is it made of?

18 gauge, 430 stainless steel, including the top, undershelf and legs.

Is the undershelf adjustable?

Yes. It measures 24" x 66".

What is the difference between the ST3072ECB4 and the ST3072EC?

The ST3072ECB4 has a 4" backsplash. The ST3072EC has a flat top.

Does it come assembled?

No. It ships knocked down. Atosa says it is easy to assemble.

Is it NSF listed?

Yes. The Atosa spec sheet shows the NSF mark.

What is the warranty?

90 days on workmanship.